Chapter 25, 1x port-based network access control – Allied Telesis AT-S63 User Manual
Page 397
Section VI: Port Security
397
Chapter 25
802.1x Port-based Network Access
Control
This chapter contains instructions on how to configure the 802.1x Port-
based Network Access Control feature on the switch. The chapter contains
the following sections:
“Setting Port Roles” on page 398
“Enabling or Disabling 802.1x Port-based Network Access Control” on
page 400
“Configuring Authenticator Port Parameters” on page 401
“Configuring Supplicant Port Parameters” on page 405
“Displaying the Port-based Network Access Control Parameters” on
page 407
“RADIUS Accounting” on page 411
Note
For background information on port-based network access control,
refer to Chapter 31, “802.1x Port-based Network Access Control,” in
the AT-S63 Management Software Menus Interface User’s Guide.