Allied Telesis AT-S63 - Manual (Page 363)

AT-S63 Management Software Web Browser Interface User’s Guide
Section V: Virtual LANs 363
Displaying the GVRP Configuration
To display the GVRP configuration, perform the following procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 6 on page 42.
2. From the Monitoring menu, select the Layer 2 option.
The Layer 2 page is displayed with the MAC Address tab displayed by
default, as shown in Figure 123 on page 302.
3. Select the GVRP tab.
The GVRP tab is shown in Figure 148.
Figure 148. GVRP Tab (Monitoring)
The GVRP Parameters section provides the following information:
GVRP
The GVRP status, Enabled or Disabled.
Leave Time
The range is 30 to 80 centiseconds and the default is 60 centiseconds.
Join Time
The range is 10 to 60 centiseconds and the default is 20 centiseconds.