Deleting all dynamic mac addresses – Allied Telesis AT-S63 User Manual
Page 97
AT-S63 Management Software Web Browser Interface User’s Guide
Section I: Basic Operations
97
Deleting All Dynamic MAC Addresses
To delete all the dynamic MAC addresses, unicast or multicast, perform
the following procedure:
1. From the Home page, select Configuration.
The System page is displayed with the General tab selected by default,
as shown in Figure 5 on page 38.
2. From the Configuration menu, select the Layer 2 option.
The Layer 2 page opens with the MAC Address tab selected by
default, as shown in Figure 25 on page 94.
3. In the Delete All Dynamic MAC Addresses section, click Delete.
4. From the Configuration menu, select the Save Config option to
permanently save your changes. (This option is not displayed if there
are no changes to save.)