Allied Telesis AT-S63 - Manual (Page 317)

AT-S63 Management Software Web Browser Interface User’s Guide
Section IV: Spanning Tree Protocols 317
4. Select the Spanning Tree tab.
The Spanning Tree tabs is shown in Figure 128 on page 309.
This tab displays information on whether spanning tree is enable or
disabled and which protocol version, STP or RSTP, is active.
5. Click View.
The Monitor RSTP Parameters tab is shown in Figure 133.
Figure 133. Monitor RSTP Parameters Tab (Monitoring)
6. To view port settings, click a port in the switch and click Status or
Settings.
The RSTP Settings page is shown in Figure 134.
Figure 134. RSTP Settings Page