Pinging a remote system, Figure 8: file system tab (monitoring) – Allied Telesis AT-S63 User Manual
Page 50
Advertising
Chapter 2: Basic Switch Parameters
50
Section I: Basic Operations
Pinging a Remote System
You can instruct the switch to ping a node on your network. This
procedure is useful in determining whether a valid link exists between the
switch and another device.
To ping a network device, perform the following procedure:
1. From the home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 6 on page 42.
2. From the Monitoring menu, select the Utilities option.
The Utilities tab is displayed with the File System tab selected by
default, as shown in Figure 8.
Figure 8. File System Tab (Monitoring)
3. Select the Ping Client tab.
Advertising