Allied Telesis AT-S63 - Manual (Page 140)

Chapter 10: File Downloads and Uploads
140 Section II: Advanced Operations
Note
The top portion of the tab is used to return the switch to its factory
default settings. For instructions, refer to “Returning the AT-S63
Management Software to the Factory Default Values” on page 52.
3. In the TFTP File Uploads and Downloads section, in the TFTP Server
IP Address field, enter the IP address of the network node that
contains the TFTP server software.
4. For the TFTP Operation parameter, click Upload.
5. In the TFTP Remote Filename field, enter a name for the file. This is
the name that the file is stored as on the TFTP server.
6. In the TFTP Local Filename field, enter the name of the file in the
switch’s file system that you want to upload to the TFTP server.
7. In TFTP File Type, select File.
Note
If you select Image as the TFTP File Type, the switch uploads its
active AT-S63 image file to the FTP server and stores it under the
name specified in step 5. There should be little or no need for you to
ever upload a switch’s image file to a TFTP server.
8. Click Apply.
The management software notifies you when the upload is complete.