Managing flow groups, Configuring flow groups, Figure 65: flow group tab (configuration) – Allied Telesis AT-S63 User Manual
Page 192
Chapter 15: Quality of Service
192
Section II: Advanced Operations
Managing Flow Groups
Flow groups are groups of classifiers that group together similar traffic
flows. This section contains the following procedures:
“Configuring Flow Groups,” next
“Modifying a Flow Group” on page 194
“Deleting a Flow Group” on page 195
“Displaying Flow Groups” on page 195
Configuring Flow
Groups
To configure a flow group, perform the following procedure:
1. From the home page, select Configuration.
The System page is displayed with the General tab selected by
default, as shown in Figure 5 on page 38.
2. From the Configuration menu, select the Services option.
The Services page is displayed with the CoS tab selected by default,
as shown in Figure 59 on page 182.
3. Select the Flow Group tab.
The Flow Group tab is shown in Figure 65.
Figure 65. Flow Group Tab (Configuration)