Allied Telesis AT-S63 - Manual (Page 198)

Chapter 15: Quality of Service
198 Section II: Advanced Operations
Managing Traffic Classes
Traffic classes consist of a set of QoS parameters and a group of QoS
flow groups. This section contains the following procedures:
ˆ “Configuring Traffic Classes,” next
ˆ “Modifying a Traffic Class” on page 200
ˆ “Deleting a Traffic Class” on page 202
ˆ “Displaying the Traffic Classes” on page 202
Configuring
Traffic Classes
To configure a traffic class, perform the following procedure:
1. From the home page, select Configuration.
The System page is displayed with the General tab selected by
default, as shown in Figure 5 on page 38.
2. From the Configuration menu, select the Services option.
The Services page is displayed with the CoS tab selected by default,
as shown in Figure 59 on page 182.
3. Select the Traffic Class tab.
The Traffic Class tab is shown in Figure 70.
Figure 70. Traffic Class Tab