Allied Telesis AT-S63 - Manual (Page 127)

AT-S63 Management Software Command Line Interface User’s Guide
127
RESET SWITCH FDB
Syntax
reset switch fdb port= port
Parameter
port Specifies the port whose dynamic MAC addresses you
want to delete from the MAC address table. You can
specify more than one port at a time.
Description
This command deletes the dynamic MAC addresses learned on a
specified port. After a port’s dynamic MAC addresses have been deleted,
the port begins to learn new addresses.
Example
The following command deletes all the dynamic MAC addresses learned
in port 5:
reset switch fdb port=5