Allied Telesis AT-S63 - Manual (Page 263)

AT-S63 Management Software Command Line Interface User’s Guide
263
Examples
The following command creates the SNMPv3 Notify Table entry called
“testengtrap1” and the notify tag is “testengtag1.” The message type is
defined as a trap message and the storage type for this entry is
nonvolatile storage.
create snmpv3 notify=testengtrap1 tag=testengtag1 type=trap
storagetype=nonvolatile
The following command creates the SNMPv3 Notify Table entry called
“testenginform5” and the notify tag is “testenginformtag5.” The
message type is defined as an inform message and the storage type for
this entry is nonvolatile storage.
create snmpv3 notify=testenginform5 tag=testenginformtag5
type=inform storagetype=nonvolatile