Allied Telesis AT-S63 - Manual (Page 175)

AT-S63 Management Software Command Line Interface User’s Guide
175
SHOW LOG STATUS
Syntax
show log status
Parameter
None.
Description
This command displays information about the event log feature.
Following is an example of what is displayed with this command:
Event Log Configuration:
Event Logging ........... Enabled
Log Full Action ............ Wrap
The Event Logging field indicates whether the feature is enabled or
disabled. The Log Full Action states the action the logs take when they
reach maximum capacity. If the action is WRAP, a log deletes the oldest
entries as it adds new ones. If the action is HALT, a log stops adding new
entries.
Example
The following command displays event log information:
show log status