Allied Telesis AT-S63 - Manual (Page 135)

AT-S63 Management Software Command Line Interface User’s Guide
135
DELETE SWITCH TRUNK
Syntax
delete switch trunk= name port= port
Parameters
trunk Specifies the name of the trunk to be modified.
port Specifies the port to be removed from the existing
port trunk. You can specify more than one port at a
time.
Description
This command removes ports from a port trunk. To completely remove a
port trunk from a switch, see “DESTROY SWITCH TRUNK” on page 136.
Caution
Disconnect all data cables from the ports of the trunk on the switch
before using this command. Removing a port from a port trunk
without first disconnecting the cables may result in loops in your
network topology, which can produce broadcast storms and poor
network performance.
Example
The following command removes port 9 from a port trunk called
Dev_trunk:
delete switch trunk=Dev_trunk port=9