Destroy snmp community – Allied Telesis AT-S63 User Manual
Page 73
Advertising
AT-S63 Management Software Command Line Interface User’s Guide
73
DESTROY SNMP COMMUNITY
Syntax
destroy snmp community="
community
"
Parameter
community
Specifies an SNMP community string to delete from
the switch. This parameter is case sensitive. The name
must be enclosed in double quotes if it contains a
space or special character, such as an exclamation
point. Otherwise, the quotes are optional.
Description
This command deletes an SNMP community string from the switch. IP
addresses of management stations and SNMP trap receivers assigned to
the community string are deleted as well.
Example
The following command deletes the community string “wind44”:
destroy snmp community=wind44
Advertising