Allied Telesis AT-S63 - Manual (Page 348)

Chapter 24: Statistics Commands
348
SHOW SWITCH PORT COUNTER
Syntax
show switch port= port counter
Parameter
port Specifies the port whose statistics you want to view.
You can specify more than one port at a time. To view
all ports, do not specify a port.
Description
This command displays the operating statistics for a port on the switch.
Examples of the statistics include the number of packets transmitted and
received, and the number of CRC errors. For a list of and definitions for
the statistics, refer to Chapter 6, “Port Parameters” in the AT-S63
Management Software Menus Interface User’s Guide.
Examples
The following command displays the operating statistics for port 14:
show switch port=14 counter
The following command displays the operating statistics for all ports:
show switch port counter