Set switch infiltering – Allied Telesis AT-S63 User Manual
Page 315
AT-S63 Management Software Command Line Interface User’s Guide
315
SET SWITCH INFILTERING
Syntax
set switch infiltering=yes|no|on|off|true|false
Parameters
infiltering
Specifies the operating status of ingress filtering. The
options are:
yes, on, true
Activates ingress filtering. The
options are equivalent. This is the
default.
no, off, false
Deactivates ingress filtering. The
options are equivalent.
Description
This command controls the status of ingress filtering. When ingress
filtering is activated, which is the default, tagged frames are filtered
when they are received on a port. When ingress filtering is deactivated,
tagged frames are filtered before they are transmitted out a port. To
view the current setting, use the “SHOW SWITCH” on page 62. For further
information on ingress filtering, refer to the AT-S63 Management
Software Menus Interface User’s Guide.
Example
The following command deactivates ingress filtering:
set switch infiltering=off