Enable sntp – Allied Telesis AT-S63 User Manual
Page 89
Advertising
AT-S63 Management Software Command Line Interface User’s Guide
89
ENABLE SNTP
Syntax
enable sntp
Parameters
None.
Description
This command enables the SNTP client software on the switch. The
default setting for SNTP is disabled. After enabled, the switch will obtain
its date and time from an SNTP server, assuming that you have specified
a server IP address with “ADD SNTPSERVER PEER|IPADDRESS” on page
86.
Example
The following command enables the SNTP client software:
enable sntp
Advertising