Allied Telesis AT-S63 - Manual (Page 85)

85
Chapter 5
Simple Network Time Protocol
(SNTP) Commands
This chapter contains the following commands:
❑ “ADD SNTPSERVER PEER|IPADDRESS” on page 86
❑ “DELETE SNTPSERVER PEER|IPADDRESS” on page 87
❑ “DISABLE SNTP” on page 88
❑ “ENABLE SNTP” on page 89
❑ “PURGE SNTP” on page 90
❑ “SET DATE” on page 91
❑ “SET SNTP” on page 92
❑ “SET TIME” on page 93
❑ “SHOW SNTP” on page 94
❑ “SHOW TIME” on page 95
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
For background information on SNTP, refer to Chapter 3, “Basic
Switch Parameters” in the AT-S63 Management Software Menus
Interface User’s Guide.