Disable ip remoteassign – Allied Telesis AT-S63 User Manual
Page 36
Advertising
Chapter 3: Basic Switch Commands
36
DISABLE IP REMOTEASSIGN
Syntax
disable ip remoteassign
Parameters
None.
Description
This command deactivates the DHCP and BOOTP client software on the
switch. This command is equivalent to “DISABLE DHCPBOOTP” on page
35. The default setting for the client software is disabled.
To activate the DHCP and BOOTP client software, refer to “ENABLE
DHCPBOOTP” on page 38 or “ENABLE IP REMOTEASSIGN” on page 39.
Example
The following command deactivates the DHCP and BOOTP client
software:
disable ip remoteassign
Advertising