Enable mstp – Allied Telesis AT-S63 User Manual
Page 229
Advertising
AT-S63 Management Software Command Line Interface User’s Guide
229
ENABLE MSTP
Syntax
enable mstp
Parameters
None.
Description
This command enables Multiple Spanning Tree Protocol on the switch.
To view the current status of MSTP, refer to “SHOW MSTP” on page 242.
You must select MSTP as the active spanning tree on the switch before
you can enable it with this command. To activate MSTP, see “ACTIVATE
MSTP” on page 223.
Example
The following command enables MSTP:
enable mstp
Advertising