Allied Telesis AT-S63 - Manual (Page 167)

AT-S63 Management Software Command Line Interface User’s Guide
167
SAVE LOG
Syntax
save log[=permanent|temporary] filename=" filename .log"
[full] [module= module ] [reverse] [severity= severity ]
[overwrite]
Parameters
log The source of the events you want to save to the log
file. The options are:
permanent Permanent (nonvolatile) memory.
Saves events stored in nonvolatile
memory, which can contain up to
2,000 events.
temporary Temporary memory. Saves events
stored in temporary memory, which
can contain up to 4,000 events. This is
the default if you do not specify the
“permanent” option.
filename Specifies the filename for the log. The name can be
up to 16 alphanumeric characters, followed by the
extension ”.log.” Spaces are allowed. The filename
must be enclosed in quotes if it contains spaces.
Otherwise, the quotes are optional.
full Specifies the amount of information saved to the
log. Without this option, the log displays the time,
module, severity, and description for each entry.
With it, the log also displays the filename, line
number, and event ID.
module Displays events associated with a particular AT-S63
module. For a list of modules, refer to Table 3 on
page 171.
reverse Controls the order of the events in the log. Without
this option, the events are saved oldest to newest.
With this option, the events are saved newest to
oldest.