Set switch trunk – Allied Telesis AT-S63 User Manual
Page 137
Advertising
AT-S63 Management Software Command Line Interface User’s Guide
137
SET SWITCH TRUNK
Syntax
set switch trunk=
name
select=[macsrc|macdest|macboth|ipsrc|ipdest|ipboth]
Parameters
trunk
Specifies the name of the port trunk.
select
Specifies the load distribution method. Options are:
macsrc
Source MAC address.
macdest
Destination MAC address.
macboth
Source address/destination MAC
address.
ipsrc
Source IP address.
ipdest
Destination IP address.
ipboth
Source address/destination IP
address.
Description
This command changes the load distribution method of an existing port
trunk.
Example
The following command changes the load distribution method of a
trunk named “Load11” to destination IP address:
set switch trunk=Load11 select=ipdest
Advertising