Show snmpv3 access – Allied Telesis AT-S63 User Manual
Page 295
Advertising
AT-S63 Management Software Command Line Interface User’s Guide
295
SHOW SNMPV3 ACCESS
Syntax
show snmpv3 access=
access
Parameter
access
Specifies an SNMPv3 Access Table entry.
Description
This command displays the SNMPv3 Access Table. You can display one
or all of the table entries.
Examples
The following command displays the SNMPv3 Access Table entry called
“production.”
show snmpv3 access=production
The following command displays all of the SNMPv3 Access Table entries:
show snmpv3 access
Advertising