Allied Telesis AT-S63 - Manual (Page 35)

AT-S63 Management Software Command Line Interface User’s Guide
35
DISABLE DHCPBOOTP
Syntax
disable dhcpbootp
Parameters
None.
Description
This command deactivates the DHCP and BOOTP client software on the
switch. This command is equivalent to “DISABLE IP REMOTEASSIGN” on
page 36. The default setting for the client software is disabled.
To activate the DHCP and BOOTP client software, refer to “ENABLE
DHCPBOOTP” on page 38 or “ENABLE IP REMOTEASSIGN” on page 39.
Example
The following command deactivates the DHCP and BOOTP client
software:
disable dhcpbootp