Allied Telesis AT-S63 - Manual (Page 136)

Chapter 9: Port Trunking Commands
136
DESTROY SWITCH TRUNK
Syntax
destroy switch trunk= name
Parameter
trunk Specifies the name of the trunk to be deleted.
Description
This command deletes a port trunk from a switch. After a port trunk has
been deleted, the ports that made up the trunk can be connected to
different end nodes.
Caution
Disconnect the cables from the port trunk on the switch before
destroying the trunk. Deleting a port trunk without first
disconnecting the cables can create loops in your network
topology. Data loops can result in broadcast storms and poor
network performance.
Example
The following command deletes the trunk called load22 from the switch:
destroy switch trunk=load22