Show switch port securitymode – Allied Telesis AT-S63 User Manual
Page 355
Advertising
AT-S63 Management Software Command Line Interface User’s Guide
355
SHOW SWITCH PORT SECURITYMODE
Syntax
show switch port=
port
securitymode
Parameters
port
Specifies the port whose security mode settings you
want to view. You can specify the ports individually
(for example, 5,7,22), as a range (for example, 18-23),
or both (for example, 1,5,14-22).
Description
This command displays the security mode settings for the ports on the
switch.
Example
The following command displays the security mode settings for ports 1
to 5:
show switch port=1-5 securitymode
Advertising