Allied Telesis AT-S63 - Manual (Page 188)

Chapter 15: IGMP Snooping Commands
188
SHOW IGMPSNOOPING
Syntax
show igmpsnooping
Parameters
None.
Description
This command displays the following IGMP parameters:
❑ IGMP snooping status
❑ Multicast host topology
❑ Host/router timeout interval
❑ Maximum multicast groups
Note
For instructions on how to set the IGMP parameters, refer to “SET IP
IGMP” on page 186.
Examples
The following command displays the current IGMP parameter settings:
show igmpsnooping