Allied Telesis AT-S63 - Manual (Page 195)

195
Chapter 17
STP Commands
This chapter contains the following commands:
❑ “ACTIVATE STP” on page 196
❑ “DISABLE STP” on page 197
❑ “ENABLE STP” on page 198
❑ “PURGE STP” on page 199
❑ “SET STP” on page 200
❑ “SET STP PORT” on page 203
❑ “SHOW STP” on page 205
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
For background information on the Spanning Tree Protocol (STP).,
refer to Chapter 16, “STP and RSTP” in the AT-S63 Management
Software Menus Interface User’s Guide.