Show dos – Allied Telesis AT-S63 User Manual
Page 453
AT-S63 Management Software Command Line Interface User’s Guide
453
SHOW DOS
Syntax 1
show dos [ipaddress] [subnet] [uplinkport]
Syntax 2
show dos
defense
port=
port
state
Parameters
ipaddress
Displays the IP address of the LAN.
subnet
Displays the subnet mask.
uplinkport
Displays the uplink port for the Land defense.
defense
Displays the status of a specified defense for a
particular port. Defense can be any of the following:
synflood
smurf
land
teardrop
ipoption
pingofdeath
port
Specifies the port whose DoS status you want to
view. You can specify only one port.
Description
These commands display DoS status information. Syntax 1 displays the
current settings for the IP address, subnet mask, and uplink port
parameters. Syntax 2 displays DoS status information for a specified
defense mechanism on a specified port.
Examples
The following command displays the IP address and subnet mask for the
Land and SMURF defenses: