Purge log – Allied Telesis AT-S63 User Manual
Page 166
Advertising
Chapter 13: Event Log Commands
166
PURGE LOG
Syntax
purge log[=permanent|temporary]
Parameter
log
The type of memory on the switch where the log file
you want to purge is located. The options are:
permanent
Permanent (nonvolatile) memory.
Deletes all events stored in
nonvolatile memory, which can
contain up to 2,000 events.
temporary
Temporary memory. Deletes all
events stored in temporary memory,
which can contain up to 4,000 events.
This is the default if you do not specify
the “permanent” option.
Description
This command deletes all the entries stored in an event log.
Example
The following command deletes the entries in the event log stored in
temporary memory:
purge log=temporary
Advertising