Allied Telesis AT-S63 - Manual (Page 163)

163
Chapter 13
Event Log Commands
This chapter contains the following commands:
❑ “DISABLE LOG” on page 164
❑ “ENABLE LOG” on page 165
❑ “PURGE LOG” on page 166
❑ “SAVE LOG” on page 167
❑ “SET LOG FULLACTION” on page 169
❑ “SHOW LOG” on page 170
❑ “SHOW LOG STATUS” on page 175
Note
Remember to save your changes with the SAVE CONFIGURATION
command. For more information about the event log, refer to
Chapter 12, “Event Log” in the AT-S63 Management Software Menus
Interface User’s Guide.