Delete sntpserver peer|ipaddress – Allied Telesis AT-S63 User Manual
Page 87
Advertising
AT-S63 Management Software Command Line Interface User’s Guide
87
DELETE SNTPSERVER PEER|IPADDRESS
Syntax
delete sntpserver peer|ipaddress=
ipaddress
Parameter
peer
Specifies the IP address of an SNTP server. The
ipaddress
parameters are equivalent.
Description
This command deletes the IP address of the SNTP server from the SNTP
client software on the switch and returns the parameter to the default
value of 0.0.0.0. To view the IP address, refer to “SHOW SNTP” on page
94.
Example
The following command deletes the SNTP server with the IP address
148.35.16.248:
delete sntpserver ipaddress=148.35.16.248
Advertising