Set user password – Allied Telesis AT-S63 User Manual
Page 56
Chapter 3: Basic Switch Commands
56
SET USER PASSWORD
Syntax
set user manager|operator password=
password
Parameter
password
Specifies the password.
Description
This command sets the manager or operator’s password. The default
manager password is “friend.” The default operator password is
“operator.” The password can be from 0 to 16 alphanumeric characters.
Allied Telesyn recommends that you avoid special characters, such as
spaces, asterisks, or exclamation points because some web browsers do
not accept them in passwords. The password is case sensitive.
SET USER MANAGER PASSWORD is equivalent to “SET PASSWORD
MANAGER” on page 52. SET USER OPERATOR PASSWORD is equivalent
to “SET PASSWORD OPERATOR” on page 53.
Example
The following command sets the operator’s password:
set user operator password=newby