Allied Telesis AT-S63 - Manual (Page 329)

AT-S63 Management Software Command Line Interface User’s Guide
329
SHOW GARP COUNTER
Syntax
show garp=gvrp counter
Parameter
garp Specifies the GARP application you want to display.
The only GARP application supported by AT-S63
management software is GVRP.
Note
The online help for this command contains an STP option. This
option is not supported.
Description
This command displays the current values for the following GARP packet
and message counters:
❑ GARP application
❑ Receive: Total GARP Packets
❑ Transmit: Total GARP Packets
❑ Receive: Invalid GARP Packets
❑ Receive Discarded: GARP Disabled
❑ Receive DIscarded: Port Not Listening
❑ Transmit Discarded: Port Not Sending
❑ Receive Discarded: Invalid Port
❑ Receive Discarded: Invalid Protocol
❑ Receive Discarded: Invalid Format
❑ Receive Discarded: Database Full
❑ Receive GARP Messages: LeaveAll
❑ Transmit GARP Messages: LeaveAll
❑ Receive GARP Messages: JoinEmpty
❑ Transmit GARP Messages: JoinEmpty