Show snmpv3 targetaddr – Allied Telesis AT-S63 User Manual
Page 299
Advertising
AT-S63 Management Software Command Line Interface User’s Guide
299
SHOW SNMPV3 TARGETADDR
Syntax
show snmpv3 targetaddr=
targetaddr
Parameter
targetaddr
Specifies an SNMPv3 Target Address Table entry.
Description
This command displays SNMPv3 Target Address Table entries. You can
display one or all of the table entries.
Examples
The following command displays the SNMPv3 Target Address Table
entry called “snmpv3host55”:
show snmpv3 targetaddr=snmpv3host55
The following command displays all of the SNMPv3 Target Address Table
entries:
show snmpv3 targetaddr
Advertising