Allied Telesis AT-S63 - Manual (Page 268)

Chapter 20: SNMPv3 Commands
268
CREATE SNMPV3 VIEW
Syntax
create snmpv3 view= view [subtree=OID|text] mask= mask
[type=included|excluded]
[storagetype=volatile|nonvolatile]
Parameters
view Specifies the name of the view, up to 32
alphanumeric characters.
subtree Specifies the view of the MIB Tree. The options are:
OID A numeric value in hexadecimal format.
text Text name of the view.
mask Specifies the subtree mask, in hexadecimal format.
type Specifies the view type. This is an optional
parameter. The options are:
included Permits a user to view the specified subtree. This is
the default.
excluded Does not permit a user to view the specified
subtree.
storagetype Specifies the storage type of this table entry. This is
an optional parameter. The options are:
volatile Does not allow you to save the table entry to the
configuration file on the switch. This is the default.
nonvolatile Allows you to save the table entry to the
configuration file on the switch.
Description
This command creates an SNMPv3 View Table entry.