Clear snmpv3 targetaddr – Allied Telesis AT-S63 User Manual
Page 253
AT-S63 Management Software Command Line Interface User’s Guide
253
CLEAR SNMPV3 TARGETADDR
Syntax
clear snmpv3 targetaddr=
targetaddr
taglist
Parameters
targetaddr
Specifies the name of the SNMPv3 Target Address
Table entry, up to 32 alphanumeric characters.
taglist
Specifies a tag or list of tags, up to 256 alphanumeric
characters.
Description
This command clears the value of the taglist parameter in an SNMPv3
Target Address Table entry.
Examples
The following command deletes the value of the taglist parameter from
the SNMPv3 Target Address Table entry called “snmphost79:”
clear snmpv3 targetaddr=snmphost44 taglist
The following command deletes the value of the taglist parameter from
the SNMPv3 Target Address Table entry called “snmphost79:”
clear snmpv3 targetaddr=snmphost79 taglist