Allied Telesis AT-S63 - Manual (Page 271)

AT-S63 Management Software Command Line Interface User’s Guide
271
DESTROY SNMPv3 ACCESS
Syntax
destroy snmpv3 access= access [securitymodel=v1|v2c|v3]
[securitylevel=noauthentication|authentication|
privacy]
Parameter
access Specifies an SNMPv3 Access Table entry.
securitymodel Specifies the security model of the user name
specified above. The options are:
v1 Associates the Security Name, or User
Name, with the SNMPv1 protocol.
v2c Associates the Security Name, or User
Name, with the SNMPv2c protocol.
v3 Associates the Security Name, or User
Name, with the SNMPv3 protocol.
securitylevel Specifies the security level. The options are:
noauthentication This option provides no authentication protocol and
no privacy protocol.
authentication This option provides an authentication protocol, but
no privacy protocol.
privacy This option provides an authentication protocol and
the privacy protocol.
Description
This command deletes an SNMPv3 Access Table entry. After you delete
an SNMPv3 Access Table entry, you cannot recover it.