Chapter 9, Port trunking commands, Chapter 9 port trunking commands – Allied Telesis AT-S63 User Manual
Page 131
Advertising
131
Chapter 9
Port Trunking Commands
This chapter contains the following commands:
❑ “ADD SWITCH TRUNK” on page 132
❑ “CREATE SWITCH TRUNK” on page 133
❑ “DELETE SWITCH TRUNK” on page 135
❑ “DESTROY SWITCH TRUNK” on page 136
❑ “SET SWITCH TRUNK” on page 137
❑ “SHOW SWITCH TRUNK” on page 138
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
For background information and guidelines on port trunking, refer
to Chapter 8, “Port Trunking” in the AT-S63 Management Software
Menus Interface User’s Guide.
Advertising