Allied Telesis AT-S63 - Manual (Page 443)

AT-S63 Management Software Command Line Interface User’s Guide
443
SET DOS IPOPTION
Syntax
set dos ipoption port= port state=enable|disable
[mirrorport= port ]
Parameters
port Specifies the switch port on which you want to enable
or disable the IP Option defense. You can specify more
than one port at a time.
state Specifies the state of the IP Option defense. The
options are:
enable Activates the defense.
disable Deactivates the defense. This is the default.
mirrorport Specifies a port where invalid traffic is copied. You can
specify only one port.
Description
This command enables and disables the IP Option DoS defense.
This type of attack occurs when an attacker sends packets containing
bad IP options to a victim node. There are many different types of IP
options attacks and the AT-S63 management software does not try to
distinguish between them. Rather, a switch port where this defense is
activated counts the number of ingress IP packets containing IP options.
If the number exceeds 20 packets per second, the switch considers this a
possible IP options attack and does the following occurs:
❑ It sends a trap to the management stations.
❑ The switch port discards all ingress packets containing IP options
for a one minute period.
This defense mechanism does not involve the switch’s CPU. You can
activate it on as many ports as you want without it impacting switch
performance.