Purge http server – Allied Telesis AT-S63 User Manual
Page 370
Advertising
Chapter 27: Web Server Commands
370
PURGE HTTP SERVER
Syntax
purge http server
Parameters
None.
Description
This command resets the HTTP server to its default values. Refer to
Appendix A, “AT-S63 Default Settings” in the AT-S63 Management
Software Menus Interface User’s Guide or in the AT-S63 Management
Software Web Browser Interface User’s Guide. To view the current web
server settings, refer to “SHOW HTTP SERVER” on page 376.
Example
The following command resets the web server parameters to their
default values:
purge http server
Advertising