Event logging of status inputs – Rockwell Automation 1404-M4_M5_M6_M8 Powermonitor 3000 User Manual, Firmware rev. 3.0 or LATER User Manual
Page 142
Advertising
142
Publication 1404-UM001F-EN-P - November 2009
Chapter 6 I/O Operations
Event Logging of Status Inputs
You may choose whether or not to record status input transitions in
the Event Log. If you were using a status input to read a KYZ meter
pulse, for example, recording transitions into the Event Log would
quickly fill the log and overwrite potentially important event
information. On the other hand, you may use the status input to
detect a discrete condition that you want logged.
Refer to Event Log Configuration Options on page 144
.
Advertising