Rockwell Automation 1404-M4_M5_M6_M8 Powermonitor 3000 User Manual, Firmware rev. 3.0 or LATER User Manual
Page 326
326
Publication 1404-UM001F-EN-P - November 2009
Appendix C Sample Applications
This rung looks for the done bit with no errors. When the done bit is received the return information is tranfered and mainten ance is
performed. Integer information can be read from file N10:0. Float information can be read from F8:0. The enable and done bit s are turned
off and the bit N7:9 is latched to notify the user that the transfer was successful. Bit B3:0/1 is set to transfer any floats to the F8:0 file after
swapping words from the incomming message.
0004
N7:0
13
Done Bit
B3:0
0
Message Pending
N7:0
8
Time Out Bit
N7:0
12
Error bit
COP
Copy File
Source #M0:3.1350
Dest
#N10:0
Length
64
COP
U
B3:0
0
Message Pending
U
N9:11
1
Perform Read
U
N9:11
0
Allow Write
U
N7:0
15
Enable Transfer Bit
U
N7:0
13
Done Bit
L
N7:0
9
Transfer Successful
L
B3:0
1
Swap Words