Rockwell Automation 1404-M4_M5_M6_M8 Powermonitor 3000 User Manual, Firmware rev. 3.0 or LATER User Manual
Page 4
Advertising
4
Publication XXXX-X.X.X - Month Year
Summary of Changes
Additioanl minor changes have been made throughout the document.
Change bars mark all changes.
Added Single Password Write data tables
Added Single Parameter Read data tables
Added sample applications:
•
Read and write power monitor tables by
using an SLC 500 controller and a
1747-SCNR ControlNet scanner.
•
Read and write power monitor tables by
using a MicroLogix controller over
EtherNet/IP and Modbus RTU
communication networks.
•
Read and write power monitor tables by
using a Component HMI over an
EtherNet/IP communication network.
Topic
Page
Advertising