Rockwell Automation 1404-M4_M5_M6_M8 Powermonitor 3000 User Manual, Firmware rev. 3.0 or LATER User Manual
Page 317
Advertising
Publication 1404-UM001F-EN-P - November 2009
317
Sample Applications Appendix C
The message configuration for the ReadOld message is shown below.
Start
This rung inserts a brief time delay before enabling the WriteNew message instruction.
msgReadOld.DN
TON
Timer On Delay
Timer
Timer1
Preset
100
Accum
0
EN
DN
Timer On Delay
Timer
Timer2
Preset
4000
Accum
0
EN
DN
After clearing the flags from the previous write, this rung performs a data table write to transfer the selected user
configured data table setup to the Powermonitor 3000 unit. If the number of paramaters in the User Configurable Data
Table is changed, the Powermonitor 3000 unit resets.
1
2
Timer1.DN
ONS
Oneshot_2
Success
U
Failed
U
MSG
Type - PLC-5 Typed Write
Message Control
msgWriteNew
EN
DN
ER
msgWriteNew.DN
Counter1.CU
TON
Advertising