Rockwell Automation 1404-M4_M5_M6_M8 Powermonitor 3000 User Manual, Firmware rev. 3.0 or LATER - Manual (Page 287)

Publication 1404-UM001F-EN-P - November 2009 287
Sample Applications Appendix C
EtherNet/IP and ControlLogix Networks
The third example reads and writes the power monitor date and time
data table by using a ControlLogix controller and an EtherNet/IP
communication network.
Tags
The example uses two ControlLogix tags, PM3K_Date_Time and
Set_date_time. Both are arrays of 8 INT elements. The program also
uses two standard MESSAGE tags, Read_time and Set_time. The
following figure shows the Set_date_time to set the power monitor
clock to January 1, 2003 at midnight. The tag PM3K_Date_Time shows
the results of a read 7.13 seconds after the write.
Set Date Time