Rockwell Automation 1404-M4_M5_M6_M8 Powermonitor 3000 User Manual, Firmware rev. 3.0 or LATER User Manual
Page 298
Advertising
298
Publication 1404-UM001F-EN-P - November 2009
Appendix C Sample Applications
The Read Clock from the Powermonitor 3000 unit and Set Clock from
the MicroLogix 1400 controller bits are used to initiate the messages,
and are reset when the message instruction either completes
successfully or an error occurs. In your application code, if the
message rungs are controlled programmatically, be sure that only one
message is enabled at a time.
Ladder Program
Advertising