Rockwell Automation 1404-M4_M5_M6_M8 Powermonitor 3000 User Manual, Firmware rev. 3.0 or LATER - Manual (Page 336)

336 Publication 1404-UM001F-EN-P - November 2009
Appendix D Technical Specifications
UL/CUL
UL 508 listed, File E96956, for Industrial Control Equipment and CUL
Certified.
CE Certification
If this product bears the CE marking, it is approved for installation
within the European Union and EEA regions. It has been designed to
meet the following directives.
EMC Directive
This product is tested to meet Council Directive 89/336/EEC
Electromagnetic Compatibility (EMC) and the following standards, in
whole, documented in a technical construction file:
•
EN 50081-2 - Generic Emission Standard, Part 2 - Industrial
Environment
•
EN 50082-2 - Generic Immunity Standard, Part 2 - Industrial
Environment
This product is intended for use in an industrial environment.
Low Voltage Directive
This product is tested to meet Council Directive 73/23/EEC Low
Voltage, by applying the safety requirements of IEC 1010-1.
This equipment is classified as open equipment and must be installed
(mounted) in an enclosure during operation as a means of providing
safety protection.
International Standard IEC 529 / NEMA / UL 508 Degree of
Protection
The Bulletin 1404 master module is rated as IP10 degree of protection
per International Standard IEC 529. It is considered an open device
per NEMA and UL 508.