Rockwell Automation 1404-M4_M5_M6_M8 Powermonitor 3000 User Manual, Firmware rev. 3.0 or LATER - Manual (Page 76)

76 Publication 1404-UM001F-EN-P - November 2009
Chapter 4 Communication
The DeviceNet scanner needs to know which bytes are scanned
from the power monitor. Select the Input tab.
This lets you determine where the information is stored inside
the scanner module. When finished configuring, click Apply.
7. Click Download to Scanner.
All of the configuration data must be downloaded to the scanner
module.
8. Download All Records, and allow the scanner to reset.