Rockwell Automation 1404-M4_M5_M6_M8 Powermonitor 3000 User Manual, Firmware rev. 3.0 or LATER - Manual (Page 75)

Publication 1404-UM001F-EN-P - November 2009 75
Communication Chapter 4
4. Read the scanner’s configuration.
Right-click on the DeviceNet scanner icon and upload the
scanner’s present configuration.
5. Edit the Scanner List.
The DeviceNet scanner needs to know how the information is
coming from the Powermonitor 3000 unit. Select the Scan List
tab and move the power monitor into the Scanlist set.
6. Edit the Data Table Map.