Conventions used in this manual, Product receiving and storage responsibility – Rockwell Automation 1746-HSRV SLC Servo Control Module User Manual User Manual
Page 16
Publication 1746-6.1.2 - July 2000
Preface P- 5
Conventions Used in this
Manual
The following conventions are used throughout this manual:
•
Bulleted lists provide information, not procedural steps.
•
Numbered lists provide sequential steps or hierarchical
information.
•
Words that you type or select appear in bold.
•
Key names match the names shown and appear in capital
letters.
•
We use this symbol to represent a twisted pair:
Figure 0.1 Twisted Pair Symbol
•
We use this symbol to represent a shielded twisted pair:
Figure 0.2 Shielded Twisted Pair Symbol
Product Receiving and
Storage Responsibility
You are responsible for thoroughly inspecting the equipment before
accepting the shipment from the freight company. Check the item(s)
you receive against your purchase order. If any items are obviously
damaged, it is your responsibility to refuse delivery until the freight
agent has noted the damage on the freight bill. Should you discover
any concealed damage during unpacking, you are responsible for
notifying the freight agent. Leave the shipping container intact and
request that the freight agent make a visual inspection of the
equipment.
Twisted Pair
Shielded Twisted Pair